The silkscreen reads: "120mm SSTC/DRSSTC Full Bridge V2.0, Grant Vieser 15/05/2021, Based on the 80mm Full Bridge by Gao Guangyan (loneoceans)." He built it after an earlier single full-bridge coil of his lost IGBTs at a public event. This scaled-up dual-bridge version runs eight FGH60N60SMD IGBTs (600 V, 60 A) off a UD2.7C with 24 V gate drive, tested to roughly 350 A at 360 VDC, 128 kHz. The loneoceans credit is printed on the board itself. A real EasyEDA schematic and PCB layout are attached to the same forum post, titled "FreakyTesla" and dated 2021-01-07. They were missed on the first pass, because at a glance the thread seemed to carry only photos.
Schematics and photos
schematic (FreakyTesla dual H-bridge) 
PCB board layout
Sources
This is the card from the driver tree, written from what the builder published. Send corrections through the forum.