A full-bridge driver on EasyEDA/oshwhub. It is not a Ward derivative. The gate-drive-transformer output is a dual totem pole, for a harder turn-on. The upper and lower channel groups are identical, so the same board serves a single bridge or two cascaded. It runs off 24 V, with current limiting through a current transformer into an LM393 comparator. It is mostly SMD, because the through-hole parts he started from would not fit the board he wanted. It is one of three points of contact we have found into the Chinese DRSSTC-building scene. That scene is active on oshwhub, bilibili and several DIY forums we could not reach directly.
Schematics and photos
schematic: the project’s own “驱动” document: TC4423MJA straight into FDD8424H, no GDT 
schematic: “DRSSTC DRIVER” rev 1.0, 2 Feb 2022: IRS4427 into FDD8424H pairs, GDT output
Sources
This is the card from the driver tree, written from what the builder published. Send corrections through the forum.